Engineering Excellence in Motion
When turbine efficiency hinges on micron-level precision, our forged rotor shafts become the heartbeat of your machinery. Unlike cast or billet alternatives, each shaft begins as a vacuum-degassed SAE 4340 ingot – hammer-forged at 2,200°F to align grain flow with stress vectors. Picture molten steel dancing under 10,000-ton presses, crystallizing into dense blanks with 30% higher fatigue strength than industry standards.
The Anatomy of Precision
Stage 1: Forging Integrity
-
Material: Vacuum arc remelted (VAR) 4340 steel
-
Process: Radial forging > Controlled cooling > UT inspection per ASTM E588
-
Outcome: Zero porosity with 1:3 aspect ratio fiber grain
Stage 2: CNC Alchemy
Our 5-axis Hermle C62 machines transform forged blanks into aerodynamic masterpieces:
Why Forged > Machined-from-Billet?
| Parameter | Forged Shaft | Billet Shaft | Advantage |
|---|---|---|---|
| Fatigue Life | 2.1×10^9 cycles | 9.3×10^8 cycles | 125% longer |
| Residual Stress | 12 MPa (compressive) | 85 MPa (tensile) | Reduced cracking |
| Cost at 500+ units | $1,820/pc | $2,150/pc | 18% savings |
*Data verified by TÜV Rheinland Report FKM-2024/07*
Real-World Endurance
Consider the Helios-7 geothermal turbine at Larderello Field:
-
Challenge: Shaft failures every 14 months from H2S corrosion
-
Our Solution:
-
Core: 4340 steel forged with 3% Cr diffusion layer
-
Surface: Laser-clad Stellite 6B (HRC 60)
-
-
Result: 63 months operation with <5μm pitting (still running)
العربية 
English 
Deutsch 
Français 
简体中文 
English (UK) 
Español 
Italiano 
Беларуская мова 
Türkçe 
Nederlands 
Português 
한국어 
日本語 
Ελληνικά 
Svenska 
Suomi 
Dansk